Mean Well Mdr-10 Power Rogowski Coil

Product Description

Feature:
Universal AC input/Full range
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
Can be installed on DIN rail TS-35 / 7.5 or 15
Built in DC OK active signal
LED indicator for power on
No load power consumption<0.75W
100% full load burn-in test


Specification:

 

OUTPUT
Model	MDR-10-5	MDR-10-12	MDR-10-15	MDR-10-24
DC Voltage	5V	12V	15V	24V
Rated Current	2A	0.84A	0.67A	0.42A
Current Range	0-2A	0-0.84A	0-0.67A	0-0.42A
Rated Power	10W	10W	10W	10W
Ripple & Noise	80mVp-p	120mVp-p	120mVp-p	150mVp-p
Voltage Adj. Range	-5%,+10%	±10%	±10%	±10%
Voltage Tolerance	±2%	±1%	±1%	±1%
Setup, Rise, Hold Up Time	1000ms, 50ms/230VAC 1000ms, 50ms/115VAC at full load  70ms/230VAC          16ms/115VAC at full load
INPUT
Voltage Range	85 ~ 264VAC          120 ~ 370VDC
AC Current	0.88A/115VAC          0.48A/230VAC
Efficiency	74%	84%	83.5%	85%
Inrush Current	COLD START 35A/115VAC          65A/230VAC
PROTECTION
Over Load	105%~160%
	Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage	115%~135%
	Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT
Working Temp., Humidity	-10°C~+60°C; 20%~90%RH
Storage Temp., Humidity	-40°C~+85°C; 10%~95%RH
Temp. Coefficient	±0.03%/°C(0~50°C)
Vibration	10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
SAFETY
Withstand Voltage	I/P-O/P: 3KVAC
Isolation Resistance	I/P-O/P: 100M Ohms / 500VDC
STANDARD
Safety Standard	Design refer to UL60950-1,TUV EN60950-1,EN50178
EMC Standard	Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2,EN61204-3
OTHERS
Dimension	25*93*56mm(L*W*H)
Weight	0.15Kg
Packing	100pcs/carton
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.  2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.  3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Company Information:
Lonwow Industry Co., Ltd. is a leading manufacturer of electrical metal conduits and fittings in Jiangsu Province, China. 
This factory is focused on Electrical Metallic conduits, fittings, C channels, and power bridge systems since 2016. Our main products are EMT conduit, IMC conduit, RSC conduit, aluminum conduit, stainless steel conduit, junction boxes, flexible conduit, C channel and related accessories. We have UL certificates for our products of EMT conduit, IMC conduit and junction boxes. 
Our products widely exporting to many countries, such as the USA, Canada, Italy, Middle East, South Asian, etc with our good quality and reputation. Warmly welcome all customers and friends to contact and cooperate with us. Thank you for your interest in our products and service. 

Our Service:
1. 24 hours prompt reply by email
2. Other thickness & size also available on request
3. 30 years warranty (special material rate, installation in relative humidity 97% below & 050 ºC 
    in the room, no deformation)
4. Free samples for your reference
5. Flexible terms of payment (T/T, L/C, DP and so on are all accepted)
6. Excellent after-sale service